Bidirectional Charging for VW ID Models
EVTEC AG
Boden
Key information
- Publication date:29 October 2025
- Workload:100%
- Contract type:Permanent position
- Place of work:Boden
The wallbox for
car batteries as storage for
bidirectional vehicles' self-generated power
crema&charge bidirectional turns the car into a home - With the crema&charge Bidi, bidi-capable electric vehicles can be connected three-phase to the home grid. In cooperation with automobile manufacturers, the next brand-specific offers for integrating vehicle batteries are created based on our new device series.
The electrical specialist installs protection and Ethernet line, depending on the country preferably plug & play as CEE32 socket. The connection power is 3x32A, 400V.
The bidirectional crema&charge is either mounted on the wall using a mounting plate or fixed to the floor with a stand.
Vo
Bidirectional charging for the lk swa ge
VW ID models n-k
- For m pa
Approved for commercial distribution for all VW ID models with min. 77 kWh battery and software 3.5
B
7 or higher. Based on VW approval for the use
7k
I
Wh of the ISO15118-2 protocol including proprietary extension Volkswagen VAS (Value Added Services) for bidirectional charging.
2
2 k
Gr i
d W cod b e id s ire
Certified grid approval since 2018
Since 2018, we have been using vehicles bidirectionally as energy storage with VDE-AR-N-4105 approval. From 2025, the crema&charge bidi connects the next vehicle generation grid-compliantly with the home grid. The battery capacity works for the house like a stationary home storage to avoid load peaks or increase self-consumption. The grid codes can be configured country- and grid operator-specific.
CCS
Plug
Charging station crema&chargebidi*
Simply bidirectional charging
DC plug
CCS-Type2, IEC62196-3
DC charging and discharging power
22kW/20kW with CEE32 plug
DC safety
Short-circuit protection, overcurrent protection,
overvoltage protection, undervoltage protection, crema&charge bidirectional is a new device platform,
insulation monitoring, grounding monitoring
DC current
1x73A form, to enable further European vehicle models with CCS2
DC charging cable
CCS2
DC voltage
150-1000 VDC (150-300VDC max. 11kW
plug as storage for self-generated, renewable
AC grid connection
L1, L2, L3, N, PE, 3x400V, 50/60Hz
AC current max. 38A 22kW/32A 20kW/16A 11kW
Energy to use. EVTEC AG, Switzerland has been delivering since 2010
Combined Charging System
DIN70121, ISO15118-2, VAS Bidi Extension, Plug IEC62196-3
(CCS2)
Electronics and charging devices for the electrification of modern
Charging cable
Cable length: 5.5m
Screen/HMI
10" with good readability under all conditions / power-,
vehicle fleets.
Energy display, battery status and charging costs in real time
RFID
ISO/IEC14443 A, ISO7816, MIFARE Ultralight®, NTAG203, MIFARE Mini,
MIFARE Classic® 1K, MIFARE Classic® 4K, FM11RF08
Communication/interfaces
OCPP1.5, OCPP1.6, OCPP2.0 (ready)
Ethernet port, GPRS, UMTS, LTE
Access/payment systems
RFID (eCarUp, Move, swisscharge, etc.),
Optional: NFC authentication, credit and debit cards like Visa,
Mastercard, Maestro, V-Pay, Apple Pay, Google Pay, Samsung Pay
Environment/vandalism
IP54
IK10 (except display)
Operating temperature
-20°C to +45°C
Storage
-40°C to +75°C with RH 5% to 95% (non-condensing)
- 22kW bidirectional
Maximum noise level
65dB(A) at 1m
Short-circuit withstand
10kA Icu
- Surplus charging and load management V2H
EMC
EN61000-6-1, -2, -3, -4
- Grid-supportive services V2G
Conformity
EN61851-1, -22, -23; EN62479; EN55011+A1
Overvoltage
Type 2 + Type 3 / Class I
- Vehicle batteries integrated as home storage
Optional: Type 1 + Type 2 + Type 3 / Class I + Class I
Efficiency
96%
Power factor
>0.99 (at >50% power)
THDI
5%
Mounting
Wall mounting, floor mounting with stand
Dimensions (WxDxH)
238x554x799mm
Weight
60kg max. mounting height approx.
2000
*Preliminary specification: Values may vary in series production.
EVTEC AG
Phone: +41 41 260 88 38
Email: evtec@evtec.ch
Web: www.evtec.ch
moka corretto system bricco corretto system ristretto&charge cappuccino&charge move&charge
Up to 384kW DC
2x 192 kW DC charging power
High-performance charger with
100kW DC, including
Plug & play 20kW DC +
Charging power remote with remote up to 384kW DC and dynamic load distribution,
22kW AC charging. Optional
Power electronics
Power electronics for
charging voltage up to 920V. charges up to three vehicles as 1000 V variant with all
Extremely compact
fleet applications.
Charges up to 3 vehicles simultaneously.
DC plugs available.
User unit. simultaneously.
car batteries as storage for
bidirectional vehicles' self-generated power
crema&charge bidirectional turns the car into a home - With the crema&charge Bidi, bidi-capable electric vehicles can be connected three-phase to the home grid. In cooperation with automobile manufacturers, the next brand-specific offers for integrating vehicle batteries are created based on our new device series.
The electrical specialist installs protection and Ethernet line, depending on the country preferably plug & play as CEE32 socket. The connection power is 3x32A, 400V.
The bidirectional crema&charge is either mounted on the wall using a mounting plate or fixed to the floor with a stand.
Vo
Bidirectional charging for the lk swa ge
VW ID models n-k
- For m pa
Approved for commercial distribution for all VW ID models with min. 77 kWh battery and software 3.5
B
7 or higher. Based on VW approval for the use
7k
I
Wh of the ISO15118-2 protocol including proprietary extension Volkswagen VAS (Value Added Services) for bidirectional charging.
2
2 k
Gr i
d W cod b e id s ire
Certified grid approval since 2018
Since 2018, we have been using vehicles bidirectionally as energy storage with VDE-AR-N-4105 approval. From 2025, the crema&charge bidi connects the next vehicle generation grid-compliantly with the home grid. The battery capacity works for the house like a stationary home storage to avoid load peaks or increase self-consumption. The grid codes can be configured country- and grid operator-specific.
CCS
Plug
Charging station crema&chargebidi*
Simply bidirectional charging
DC plug
CCS-Type2, IEC62196-3
DC charging and discharging power
22kW/20kW with CEE32 plug
DC safety
Short-circuit protection, overcurrent protection,
overvoltage protection, undervoltage protection, crema&charge bidirectional is a new device platform,
insulation monitoring, grounding monitoring
DC current
1x73A form, to enable further European vehicle models with CCS2
DC charging cable
CCS2
DC voltage
150-1000 VDC (150-300VDC max. 11kW
plug as storage for self-generated, renewable
AC grid connection
L1, L2, L3, N, PE, 3x400V, 50/60Hz
AC current max. 38A 22kW/32A 20kW/16A 11kW
Energy to use. EVTEC AG, Switzerland has been delivering since 2010
Combined Charging System
DIN70121, ISO15118-2, VAS Bidi Extension, Plug IEC62196-3
(CCS2)
Electronics and charging devices for the electrification of modern
Charging cable
Cable length: 5.5m
Screen/HMI
10" with good readability under all conditions / power-,
vehicle fleets.
Energy display, battery status and charging costs in real time
RFID
ISO/IEC14443 A, ISO7816, MIFARE Ultralight®, NTAG203, MIFARE Mini,
MIFARE Classic® 1K, MIFARE Classic® 4K, FM11RF08
Communication/interfaces
OCPP1.5, OCPP1.6, OCPP2.0 (ready)
Ethernet port, GPRS, UMTS, LTE
Access/payment systems
RFID (eCarUp, Move, swisscharge, etc.),
Optional: NFC authentication, credit and debit cards like Visa,
Mastercard, Maestro, V-Pay, Apple Pay, Google Pay, Samsung Pay
Environment/vandalism
IP54
IK10 (except display)
Operating temperature
-20°C to +45°C
Storage
-40°C to +75°C with RH 5% to 95% (non-condensing)
- 22kW bidirectional
Maximum noise level
65dB(A) at 1m
Short-circuit withstand
10kA Icu
- Surplus charging and load management V2H
EMC
EN61000-6-1, -2, -3, -4
- Grid-supportive services V2G
Conformity
EN61851-1, -22, -23; EN62479; EN55011+A1
Overvoltage
Type 2 + Type 3 / Class I
- Vehicle batteries integrated as home storage
Optional: Type 1 + Type 2 + Type 3 / Class I + Class I
Efficiency
96%
Power factor
>0.99 (at >50% power)
THDI
5%
Mounting
Wall mounting, floor mounting with stand
Dimensions (WxDxH)
238x554x799mm
Weight
60kg max. mounting height approx.
2000
*Preliminary specification: Values may vary in series production.
EVTEC AG
Phone: +41 41 260 88 38
Email: evtec@evtec.ch
Web: www.evtec.ch
moka corretto system bricco corretto system ristretto&charge cappuccino&charge move&charge
Up to 384kW DC
2x 192 kW DC charging power
High-performance charger with
100kW DC, including
Plug & play 20kW DC +
Charging power remote with remote up to 384kW DC and dynamic load distribution,
22kW AC charging. Optional
Power electronics
Power electronics for
charging voltage up to 920V. charges up to three vehicles as 1000 V variant with all
Extremely compact
fleet applications.
Charges up to 3 vehicles simultaneously.
DC plugs available.
User unit. simultaneously.
