Maintenance and Care Instructions
SEA Schliess-Systeme AG
Zollikofen
Key information
- Publication date:28 October 2025
- Workload:100%
- Contract type:Permanent position
- Place of work:Zollikofen
Job summary
This document provides maintenance and care instructions for locking cylinders, ensuring reliability and longevity. Regular upkeep and user guidelines can prolong the lifespan significantly.
Tasks
- Locking cylinders are designed for at least 100,000 cycles.
- Avoid excessive force on keys to prevent damage.
- Maintain electronic components to ensure optimal performance.
Skills
- Understanding of product maintenance and care requirements is essential.
- Attention to detail in following maintenance guidelines.
- Ability to manage electronic and mechanical components effectively.
Is this helpful?
Product Performance
Lock cylinders are basically designed for a service life of at least 100,000 locking cycles. This means that with an average use of 15 to 20 open/close movements per day, the expected service life would be reached after 15 years. With some care and a few simple handling instructions, locking systems can easily be operated for longer. General Instructions
Do not pull doors with the key, as this leads to overstrain of the lock cylinder. Avoid excessive force on the key, as it can be damaged. Do not use defective, heavily worn, or bent keys, as these can damage the lock cylinder. Replace damaged lock cylinders, as they in turn damage the keys. Do not spray oils or resinous substances into the cylinders - observe maintenance instructions. Detailed information about the respective product can be found in the operating instructions. The latest edition is published on the homepage www.sea.ch. Safety Instructions Electronics WARNING
Products with electronic components are sensitive to electrostatic discharge (ESD). Contact by persons or objects can cause an electrostatic discharge that can damage or destroy the electronic component. For smooth operation, the following notes must be observed - Maintain lock cylinders at least once a year with SEAslide (cleans, lubricates, acts corrosion-inhibiting):
1. Spray a small amount of care product on the key (not into the cylinder) 2. Insert the key several times into the lock cylinder 3. Clean the key with a dry cloth
- Batteries of battery-powered components must be replaced at regular intervals or at the latest when the first battery warning appears.
- Perform firmware updates on the electronic components.
- Loose fastening screws (e.g. faceplate screw) must be tightened.
- Perform a function check after maintenance work.
Hereby SEA Schliess-Systeme AG declares that the product meets the essential requirements and regulations of all relevant directives 2
V fulfilled.
8 1
0
2 /
0
0.
00
.0
0.
00
.0
0.
©SEA Schliess-Systeme AG - Lätternweg 30 - CH-3052 Zollikofen / Bern - Phone +41 (0)31 915 20 20 - office@sea.ch - www.sea.ch 21
0.
59
Maintenance and Care Instructions Product Performance
Lock cylinders are always designed for a service life of at least 100,000 locking cycles. This means that for an average use of 15 to 20 opening and closing movements per day, the service life would be reached after 15 years. With a little maintenance and by following some simple handling instructions, locking systems can be used without problems for longer. General Instructions
- Do not pull doors with the key, as this can cause excessive stress on the lock cylinder.
- Avoid applying excessive force on the key, as this can damage it.
- Do not use defective, heavily worn, or bent keys, as these can damage the lock cylinder.
- Replace damaged lock cylinders, as they can in turn damage the keys.
- Do not spray oils or resinous products into the cylinder - observe maintenance instructions.
- Complete information on the respective product can be found in the corresponding manual. The most recent edition is available on the website www.sea.ch.
- WARNING
- Products containing electronic components are sensitive to electrostatic discharges (ESD). Contact with people or objects can cause an electrostatic discharge that may damage or destroy electronic components.
- Maintain lock cylinders at least once a year with SEAslide:
1. Spray a small amount of care product on the key (not into the cylinder) 2. Insert the key several times into the lock cylinder 3. Clean the key with a dry cloth
- Batteries of battery-operated components must be replaced at regular intervals or at the latest as soon as the first low battery warning occurs.
- Perform firmware updates on the electronic components.
- Loose fastening screws (e.g. faceplate screws) must be tightened.
- Perform a function check once maintenance work has been completed.
SEA Locking Systems SA declares that the product meets the fundamental requirements and provisions of all relevant directives 2 V 8 pertinent.
1 0
2
/
00
.0
0.
00
.0
0.
00
.2
©SEA Schliess-Systeme AG - Lätternweg 30 - CH-3052 Zollikofen / Bern - Phone +41 (0)31 915 20 20 - office@sea.ch - www.sea.ch 1
0.
59
